|PLEASE READ THE FOLLOWING
FOR CUSTOM SABER OPTIONS
AND ORDERING INFORMATION
Below you will find some useful information one some
of the saber options.
Here are some of the materials sabers can be made
Aluminium is a soft, lightweight metal with normally a
dull silvery appearance. It has excellent corrosion
resistance and durability. Aluminum is the primary
material used in most of our sabers.
Steel comes in many forms, and is much heavier than
aluminum. It has a greater durability than aluminum,
but is more difficult to machine and is more dull in
Brass has a yellow color, somewhat similar to gold. It
is relatively resistant to tarnishing.
Copper is a reddish-colored metal, with a high
electrical and thermal conductivity.
Here are some of the finishes available:
Static sabers are primarily used for costuming and
display. They contain no working parts are not
designed do duel with.
Dueling sabers are designed to withstand the rigors of
dueling. Usually a 3/4 inch hole is drilled in the
emitter end to hold a polycarbonate or carbon
fiber blade. The blade is then held in place
by a set screw or knob.
An LED saber has a powerful Luxeon LED inside that
illuminates a 3/4 inch or 1 inch polycarbonate rod
which is lined with custom blade film. The light
produced makes for one of the brightest blades
available. These sabers may be used for dueling also.
Here are the 3 watt Luxeon LED colors available.
White LED's can be filtered with color disks to
produce a variety of different colored blades.
Unfortunately when you use the disks the intensity of
the blade is not as bright as if you were to use a color
Nocturne Armory can usually add any after market
soundboard to our custom sabers. The most popular
would be Master Replicas, Hasbro, and Plecter Labs.
Prices for custom sabers vary greatly. A typical LED
single bladed saber can range anywhere from $150 to
$450 depending on the design and options. Dual
bladed sabers can range anywhere from $250 to
$650. A design of some sort is needed to give an
estimate on the price.